MQ control - MEDICAL SHOP
  • CHI SIAMO
I prodotti sono disponibili c/o il negozio in P.zza Santa Lucia 7 a Massagno, per info 091 797 4067 o info@mqcontrol.net

HOSPITAL


Immagine
MQ359.11
Examination table

Suitable for use in admission, surgical, gynecological and other departments of health facilities when doing general examination of patients.
Three section, completely knock down, epoxy powder coating frame white colour square tube 40x25 mm. Thickness 1,5 mm, steel grade Q195
Fully adjustable back and legrest sections.
Lateral accessories supports made of stainless steel AISI 201 thickness 1 mm.
Complete with double step, to allow patient easy mounting, frame epoxy coated white colour, thickness 2 mm steel grade Q195.
Steps made of non slip plastic material black colour. 

Loading capacity 120 kg.

Complete with following spare parts i.v. stand 1 pc
legs supports 2 pcs ,
armrest 2 pcs
arm support 1 pc

Dimensions:
1850x650x850 h. mm. modifiche.

Immagine
MQ358.11
Clinical Couch

​Manufactured in epoxy powder coated square steel tube, thickness 1,2 mm steel grade Q195.
Adjustable headrest from 0° to 45°.
Top made of MDF 16 mm, is upholstered and covered with washable, disinfectable plastic material.
Colour of the top black. Knock down construction.


Load Capacity: 150 Kg
Dimension: mm1950x670x520 h.
Headrest: 600x670


Immagine
MQ1020.00
Gynecological Couch

Designed for use in health care facilities when doing gynecological examinations, performing various manipulations, as well as minor surgical procedures.
gynaecological examination couch, steel frame 1,5 mm steel grade: Q195
Mechanical, manual control
Variable height adjustable by a hydraulic pump from 600 mm to 1100 mm
Sturdy construction. Epoxy coated steel square tube with antirust treatment.
Back and seat sections covered with thick foam, thickness 40 mm, covered with PU leather allowing for regular disinfection and resistant to disinfectant.
Support sections or platform with durable rubber caps to make the construction steady and non-slip
Mounted on 4 adjustable rubber feet Backrest section with adjustable headrest.
​
Leg support
Two Legs support adjustable with screw clamp for easy control, made with Non-slip, hygienic and durable material
Fixing clamp for anatomical knee crutches adjustament

Arm support
Arm Support with variable angle, removable
intravenous infusion fixed by clip. 2 mm steel – Steel Grade:Q195 Dense foam rubber coating for frequent washing and disinfection.

Waste bowl:
Large Stainless Steel rectangular sliding tray for liquid collection under the seat. Slides base is metal with polymeric coating
Fluorine plastic working pad
Dimension 160x80x250mm

Spare parts included:
Kneeboard legs support – 2 pairs Arm support - 1 pcs.
Waste bowl, drawable - 1 pcs. Screw clamps – 1 pair
mm 1400x600x600/1100 h Load Capacity: 180 Kg

Immagine
​MQ1018.00
Variable height examination table

Designed to be used when doing various medical procedures, bandaging and  simple surgeries,
Frame made of strong steel tubes with epoxy-polymeric powder coating.
Bed made of foamed polyurethane (foam), coated with medical purpose leatherette withstanding to repetitive sanitization.
Foam thickness 40 mm.
Headrest section adjustable from 0⁰  to 45⁰
Electrical variable height 45–95 cm.
Mounted on four castors diam. 100mm, two with brake.
​Loading capacity 180 kg.

Dimensions:
Dim. 200x60 cm 45/95 h



Immagine
MQ300.00
​Fowler bed 3 section

Bed with mattress cod. MQ300.00
Four sections bed with steel welded base epoxy powder coated , made of steel 1,5 mm thickness , steel grade Q195,
Complete with adjustable side rails.
Head and foot panels made of high-quality plastic tickness 5 mm.
Mounted on four Ø125 mm castors – two are fixed at the end of headboard and two rotating wheels with separate break locks in foot section.
Bumpers at all four angles of the bed. Easily disinfected.
Back and knee sections adjustable by two crancks located at the foot end Back section adjustable from 0 to 75o
Knee section adjustable from 0 to 35o

Load Capacity: 150 Kg
Bed 2000x900 mm

Immagine
DA-7
Five function electric bed
 
Main feature:1.ICU Bed (5 function) with electrically operated remote controlled
2.back rest tilting 0-75º, knee rest tilting 0-45°, trendelenburg tilting 0-14°, Reverse trendelenburg tilting 0-14°.
3.All functions controlled by motor Device (Actuator), 220 - 240 V AC, 50 Hz. (110 V on request) through remote control board.
4.Removable & interchangeable high quality ABS  plastic head panel and foot panel.
5.Head panel and foot panel equipped with safety lock
6.Epoxy coated mild steel frame work and 4 section perforated top.
7.Collapsible side rail
8.125mm diam noiseless castors with single brakes.
9.Provision for I.V. Rod on both sides of the bed.
10.Headboard and footboard color is optional.

Immagine
MQ1251
​Patient trolley with removable stretcher

Patient trolley with removable stretcher designed to carry patients within health facility and to the ambulance.
Trolley made of a metal frame tubes, cross-section 25x40 mm with polymeric powder Coating.
Stretcher made of stainless steel 1,5 mm thickness, steel grade: Q195 Mounted on 4 Ø125 mm castors, two with brakes.

mm 2100x650x800 h
Load: 150 Kg
Castors Ø125 mm

Immagine
MQ751.00 
Children's bed with adjustable side rails

Child bed with load-bearing structure in rectangular steel tube epoxy painted in white colour with mattress support made of welded steel rod.
The sides slide on tube attached to headboards with plastic supports.
The locking in position of the rails is achieved by means of threaded knobs. The platform headboards and the edges are painted with white epoxy powder. Mounted on four Ø 100 mm. casters two with brakes. Knock down construction.

mm 1400x700x1300 h.
Mattress platform 660 mm h.
Load: 40 kg 




Immagine
MQ800.00
Bed for new born

Trolley
Trolley tilting cradle with TR and RTR positions realized in chromed steel tube mm round section with environmentally clean polymer powder coating that is resistant to multiple cleaning with disinfectants used in medicine. Mounting: on 4 castor wheels Ø75 mm, two with brakes
Humid crib (incubator)
Incubatore made of Plexiglas transparent 5mm thick, disinfected, non-allergenic and unbrea- kable with eyelets at the base and ability to TR/ RTR and horizontal positions, with pocket for baby's nameplate.
Trolley: mm 900x500x1000 h.
Crib: mm 750x475x245 h.
Load: 10 kg 


Immagine
150100
SWADDLING TABLE

Made of epoxy painted steel tube, thickness 1,5 mm steel grade Q195.
Tube section 25x25 mm.
Tabletop made of MDF 16 mm thickness, sides height 120 mm upholstered and covered with washable, disinfectable plastic material, in white colour.

Mattress thickness 40 mm, dimensions 1000x700 mm. MDF lower shelf 16 mm.
Knock down construction. 


110x73 cm 85 h.

Immagine
MQ650.00
Table for patient’s bandagin


Made of steel polymeric powder coating, thickness 1 mm.
Two metal sheves thickness 1 mm.
Two drawers made of square steel pipe sixe 25x25 mm.
Mounted on four ball bearing castors Ø50 mm,two of which with brakes.
​

Loading Kg 15
mm 600x650x850 h. Castors Ø50 mm 


Immagine
MQ647.00
Instrument table

Frame made of square tube 20x20x1 mm polymeric powder coated.
Two removable shelves made of polymethyl methacrylate, thickness 6 mm. Mounted on 4 ball bearing castors Ø50 mm, two of which with brakes.


mm 600x500x850 h
Loading capacity 10 Kg
​ Castors Ø50 mm 



Immagine
X-RAY FILM VIEWERS 

Wall model
Constructed from enamelled sheet steel. Fluorescent cold light. Unbreakable white monochromatic di user with supporting device.


MQ040.00 40 x 43 cm
MQ080.00 80 x 43 cm
MQ120.00 120 x 43 cm
MQ160.00 160 x 43 cm 

Immagine
OPTOTYPE

Acrylic screen. Available in two versions:
1. Electric: with steel enameled structure. Back-light. On/O switch, fuses protection and Schuko plug.
2. 2 – Simple

Immagine
MQ737.00
Led Examination Lamp 

Shadowless high-performance LED light for examination with adjustable arm.
​The absence of UV or infrared in the light beam is suitable to light heat - sensitive parts. Foldable stainless steel base with 5 x Ø 50 mm. castors.

Immagine
MQ825.00
​3 Section ward screen


Three section ward screen
​Steel of epoxy powder coated frame, resistand curtains neutral colour , suitable for washing , disinfection and sterilization.

Basement mounted on rubber feet non skid


Each section width 600 mm.
Total height 1600 mm.


Immagine
MQ694.62
I.V.STAND


Infusion stand with two bottle holders and four hooks for infusion packs.
Made of strong steel grade Q195 thickness 1,5 mm. Height adjustable between 1300 and 2200 mm.
Mounted on 5 wheels Ø75, base powder epoxy, two of them with brake.

Heigt mm 1300-2200 Wheel Ø75 mm
Max loading top 20 kg
Max loading of hooks 20 kg
Max loading of bottle holder 5 kg 



MQ-Control SA - Via Vanoni 4 - Lugano - Svizzera  - info@mqcontrol.net
  • CHI SIAMO